پمپ پریستالتیک مدل LabM1 محصول Shenchen

Product Introduction: The second generation basic type peristaltic pump, with ABS engineering plastic housing, streamlined body design, more fashion sense. Speed range: 0.5-600rpm/min, suitable for various pump heads. Flow rate range: 0.00034-2280ml/min. Membrane keypad control, multiple external control for selection. Support RS232/RS485 (standard Modbus protocol) communication, it is easy to connect with computer, PLC, HMI etc. Function and Features: 1. 3 digital LED display the motor speed. 2. Membrane keypad control, not only adjust speed manually, but also control automatically through external interface. 3. Full speed button: with full filling and emptying function. 4. Timing test function, time range: 0.5-999s, setting test time freely, can be used for simple dispensing. 5. Internal isolate external control design. External control signal have active signal and passive signal, users can use it freely. 6. RS232 and RS485 communication for option. The pump can be controlled by PC through RS232 and serial debugging software, control the pump start/stop, direction and speed. To achieve dispensing and filling function. It also can feedback pump working status according with external control request. 7. Big torque, low consumption, strong adaptability. 8. Good performance drive circuit, good cooling condition, low noise, working stable, power down memory function. 9. Super strong anti-jamming feature, wide voltage design, suitable for complex power supply environment. 10. Circuit board spray with three anti-paint. Anti-dust, anti-moisture, anti-static, resist corrosion. Technical Specification: Flow rate range LabM1: 0.00034~570ml/min LabM3:0.00034-1330ml/min LabM6:0.00034-2280ml/min Speed range 0.1-600rpm Speed resolution 0.1rpm Back suction angle 0-360° Testing time range 0.5s – 999s Outlet pressure 0.1Mpa ( 0.86-1.0mm wall thickness tubing)

0.1-0.27Mpa ( 1.6-2.4mm wall thickness tubing) Motor type Stepper motor Circuit system Shenchen-M-CIR Control system Shenchen-M-EMB Display 3 Digital LED display Control method Membrane keypad External control speed signal 0-5V, 0-10V, 4-20mA for option Start/stop, direction signal Passive switch signal, such as foot pedal switch Default 24V Communication interface RS232/RS485 support MODBUS protocol (RTU mode) Output interface Output motor working status (Open-Collector output) Power supply 220V±10%, 50Hz/60Hz ( standard), 110V±10%, 50Hz/60Hz (optional) Drive dimension 261.4 x 157.3 x 230.7mm （ L x W x H ) Drive weight 4.40kg Power consumption <50W Environment temperature 0-40℃ Relative humidity <80% IP rate IP31